Want to see exactly how to fit your new Razorback console lid cover?

<p><br></p><blockquote>Please see below for a guide on how to fit most common console lid covers</blockquote><p><br></p><h2 dir="ltr" id><span contenteditable="false" draggable="true" class="fr-video fr-deletable fr-rv fr-fvc fr-dvb fr-draggable"><iframe width="100%" src="https://www.youtube.com/embed/shorts?/8TOGr0bCsqE&amp;wmode=opaque&amp;rel=0" frameborder="0" allowfullscreen class="fr-draggable"></iframe></span><br></h2><hr><p><br></p><h2 dir="ltr" id="general-fitting-technique">General fitting technique</h2><ol dir="ltr"><li>If the material feels stiff (especially canvas, or in cold weather), leave it in the sun for 10&#x2013;15 minutes before fitting.</li><li>Hook the back of the cover over the back edge of the console lid first.</li><li>Open the lid slightly to widen the gap at the back so you can tuck the cover in further.</li><li>Close the lid, then stretch the cover over the front.</li><li>Fasten the velcro securely underneath - once seated correctly, the velcro should meet with plenty of overlap.</li></ol><h2 dir="ltr" id="-1"><br></h2><hr><p><br></p><h2 dir="ltr" id="still-stuck-after-watching-the-video">Still stuck after watching the video?</h2><p dir="ltr">Check <strong>Console Lid Common Fitment Issues &amp; Tips</strong> next. If this doesn&apos;t resolve it, contact us with your order number, vehicle details, and photos.</p>

Console lid cover video guides

Tips and tricks to help you get that perfect Razorback fit!

<h2 dir="ltr" id="common-tips-for-helping-you-get-that-perfect-razorback-fit-on-your-brand-new-console-lid-cover">Common tips for helping you get that perfect Razorback fit on your brand new console lid cover!</h2><hr><p><br></p><blockquote dir="ltr">&quot;The console lid cover won&apos;t stretch over the lid / feels too small&quot;</blockquote><p><br></p><ol dir="ltr"><li>Warm the cover in the sun for several minutes if the material feels stiff.</li><li>Hook the back of the cover over the back edge of the console lid first.</li><li>Open the lid slightly to widen the gap at the back so you can tuck the cover in further.</li><li>Close the lid, then stretch the cover over the front.</li><li>Fasten the velcro securely underneath.</li></ol><p dir="ltr"><br></p><hr><p><br></p><blockquote dir="ltr">&quot;The console lid cover stops the lid from closing / won&apos;t latch&quot;</blockquote><p><br></p><p dir="ltr">The cover is designed to hook around the back of the lid with less fabric sitting near the clip mechanism - if it&apos;s not seated far enough back, fabric bunches at the latch point and blocks it. Use the back-to-front technique above.</p><p dir="ltr"><br></p><hr><p><br></p><blockquote dir="ltr">&quot;The velcro straps on the console cover are too short / don&apos;t meet in the middle&quot;</blockquote><p><br></p><p dir="ltr">Make sure you have the console lid cover positioned correctly, that the back and sides are lined up with the console underneath.&#xA0;<br>If you have the cover around the wrong way - then you will not be able to connect the velcro in the way the cover was designed.&#xA0;</p><p dir="ltr"><br></p><hr><p><br></p><blockquote dir="ltr">&quot;The console cover keeps sliding or pulling away at the back&quot;</blockquote><p><br></p><p dir="ltr">This usually occurs on consoles that have a tight recess at the back for the cover to fit into, you can make sure that the cover sits fully in the back recess - which will help the cover keep the cover in place.&#xA0;<br>This is much easier to do with the console lid lifted up - allowing you to slide the back of the console cover into the gap, and then close to console to keep the cover firmly in place.&#xA0;</p><p dir="ltr"><br></p><hr><p><br></p><blockquote dir="ltr">&quot;I think I&apos;ve been sent the wrong console cover for my model&quot;</blockquote><p dir="ltr">Facelift/generation mix-ups can happen either when ordering, or during dispatch. Before troubleshooting fitment, check the white tag label inside the cover against your vehicle&apos;s actual generation/badge.<br>If you still believe you have the incorrect part - please reach out to our support team who will be able to help you out.&#xA0;<br><br></p><h2 dir="ltr" id><br></h2><p dir="ltr"><br></p><hr><h2 dir="ltr" id="still-not-sorted">Still not sorted?</h2><p dir="ltr">Contact us with your order number, vehicle make/model/year/badge, and a couple of clear photos.</p>

Console lid cover common fitment issues and tips

Want to see how to fit your new Razorback centre console organiser?

<p>How to fit your new Razorback centre console organiser</p><p><br></p><p dir="ltr" id="isPasted"><strong>Fitting time:</strong> ~20 minutes</p><p dir="ltr"><strong>In the box:</strong> 1x Console Organiser Cover</p><hr><p><br></p><blockquote dir="ltr">Before you start</blockquote><p dir="ltr">If your vehicle is new, the centre console plastic likely has a factory protective coating that will stop the adhesive from bonding properly. Wipe the area down with a mild surface cleaner or isopropyl alcohol (test on a small hidden area first), then let it dry completely before continuing.</p><p><br></p><h4 dir="ltr" id="steps">Steps</h4><ol dir="ltr"><li><strong>Clean the surface.</strong> Wipe your centre console with a dry cloth to remove dust and loose debris (see prep note above if your car is new).</li><li><strong>Position the cover.</strong> Arrange the organiser cover in the correct spot and attach the white plastic clip underneath the plastic enclosure if applicable.</li><li><strong>Join the Velcro.</strong> Press both sides of the Velcro strip at the rear of the organiser together.</li><li><strong>Apply and attach.</strong> Line the adhesive tape up with the Velcro on the console and leave it for a few minutes to ensure adhesive has worked - then press the cover firmly onto the tape.</li></ol><h4 dir="ltr" id><br></h4><hr><p><br></p><h4 dir="ltr" id="tips-for-the-best-result">Tips for the best result</h4><ul dir="ltr"><li>Dry-fit the cover first to confirm position &#x2014; the tape only sticks once.</li><li>Hold firm pressure over the taped area for about 30 seconds after attaching.</li><li>Avoid heavy use of the organiser for the first 24 hours while the adhesive fully cures.</li><li>Fit in a warm space if possible &#x2014; cold temperatures reduce adhesive grip.</li></ul><hr><p><br></p><p>If you want a fitting guide to follow along you can check it out below:&#xA0;</p><div class="fr-deletable gorgias-file-attachment__wrapper" contenteditable="false"><div><i class="material-icons">attach_file</i> <a class="gorgias-file-attachment__anchor-name" href="https://attachments.gorgias.help/0eMnwxKBvkA79bDN/hc/bgJ1Q6QyDZ6vXKOM/2026091005-2f0a235d-33c5-45e7-9e1e-a0c896a44e41-fittingrb-%20centre%20console%20organiser.pdf" target="_blank" rel="noopener noreferrer">FittingRB- Centre Console Organiser.pdf</a> <span class="gorgias-file-attachment__span-size">4.1MB</span></div><i class="material-icons gorgias-file-attachment__close-icon">close</i></div><p><br></p><h4 dir="ltr" id="-1"><br></h4><h4 dir="ltr" id="need-help">Need help?</h4><p dir="ltr">If you run into any issues during fitting, reach out to our team and we&apos;ll help sort it out.</p><p><br></p>

Console lid & organiser fitting guides

Console lid cover video guides

Console lid cover common fitment issues and tips

Centre console organiser fitting guide