Centre console organiser fitting guideUpdated an hour ago

How to fit your new Razorback centre console organiser

Fitting time: ~20 minutes

In the box: 1x Console Organiser Cover

Before you start

If your vehicle is new, the centre console plastic likely has a factory protective coating that will stop the adhesive from bonding properly. Wipe the area down with a mild surface cleaner or isopropyl alcohol (test on a small hidden area first), then let it dry completely before continuing.

Steps

1. Clean the surface. Wipe your centre console with a dry cloth to remove dust and loose debris (see prep note above if your car is new).
2. Position the cover. Arrange the organiser cover in the correct spot and attach the white plastic clip underneath the plastic enclosure if applicable.
3. Join the Velcro. Press both sides of the Velcro strip at the rear of the organiser together.
4. Apply and attach. Line the adhesive tape up with the Velcro on the console and leave it for a few minutes to ensure adhesive has worked - then press the cover firmly onto the tape.

Tips for the best result

• Dry-fit the cover first to confirm position — the tape only sticks once.
• Hold firm pressure over the taped area for about 30 seconds after attaching.
• Avoid heavy use of the organiser for the first 24 hours while the adhesive fully cures.
• Fit in a warm space if possible — cold temperatures reduce adhesive grip.

If you want a fitting guide to follow along you can check it out below: 

Need help?

If you run into any issues during fitting, reach out to our team and we'll help sort it out.